Signwarehouse.com Cutting Plotter Driver OPS662-XSW Ver.2.20A
for Microsoft Windows 2000 / Windows XP / Windows Vista

Thank you for choosing the Signwarehouse.com OPS662-XSW Cutting Plotter Driver. 

The README.TXT file in each directory contains instructions on installation and
operation as well as other notes. Be sure to read them carefully before 
installing or using this driver.

Before you begin installation, check that the program disk contains the 
following:

  WIN2K_VISTA\DISK1             For Windows 2000 / Windows XP / Windows Vista
  WIN2K_VISTA\SGNCUT.DLL
  WIN2K_VISTA\SGNCUTUI.DLL
  WIN2K_VISTA\SGNCUTUI.CHM
  WIN2K_VISTA\GPCUTMON.DLL
  WIN2K_VISTA\SGNCUT.INF
  WIN2K_VISTA\SGNCUT.CAT
  WIN2K_VISTA\README.TXT
  WIN2K_VISTA\Qe60.GPD
  WIN2K_VISTA\Q75.GPD
  WIN2K_VISTA\Q100.GPD
  WIN2K_VISTA\Q130.GPD
  WIN2K_VISTA\Q160.GPD
  WIN2K_VISTA\Q60.GPD
  WIN2K_VISTA\Q24.GPD
  WIN2K_VISTA\Q30.GPD
  WIN2K_VISTA\Q42.GPD
  WIN2K_VISTA\Q54.GPD
  WIN2K_VISTA\Q64.GPD


Required PC specifications
(The specification needs to be higher than recommended specification
 by using OS)

* OS         : Windows 2000 / Windows XP / Windows Vista
* CPU        : Pentium III 800MHz or faster
* Memory     : 512MB or larger
* Display    : 1024x768 True Color
* Mouse
* CD-ROM drive
* Network interface  : 10Base-T/100Base-TX
* USB interface      : USB2.0(Full Speed)
* Serial interface   : RS-232C
* Parallel interface : Centronics parallel interface
Note:
 The interface which can be used depends on the plotter model.
 The plotter needs to be connected with either interface.

Precautions to be observed when connecting the Vinyl Express Q/Qe Series Cutting
Plotter via USB.
   * The plotter does not operate under Windows 3.1/95/98/98SE/Me or 
     Windows NT.
   * Operation with other than the included driver is not guaranteed.
   * Do not connect multiple plotters to a single computer.
   * Operation is not guaranteed if the plotter is connected to a USB hub 
     or to a USB extension board.

END
